Upset or Flash Weld Symbols

https://weldguru.com/wp-content/uploads/2017/11/Find-A-Welding-School-Near-You.png
Find A Welding School Near You
http://weldguru.com/wp-content/uploads/2017/01/WeldGuru-slider02.png
WeldGuru-slider02
http://weldguru.com/wp-content/uploads/2017/01/WeldGuru-slider01.png
WeldGuru-slider01

Upset or Flash Weld Symbols


Flash or upset weld symbols have no arrow side or other side
significance in themselves, although supplementary symbols used in
conjunction with then may have such significance. The weld symbols for
flash or upset welding must be centered on the reference line.
Dimensions need not be shown on the welding symbol.

Surface Contour of Flash Weld Symbols or Upset Welds

 The contour
symbols (fig. 3-3) for flash or upset welds (fig. 3-80) are indicated
in the same manner as that for fillet welds (see this page for more).

Surface Contour of Flash or Upset Welds – Figure 3-80

Welding Jobs in Your Area



Page Author: