A miter saw is one of the essential tools that any person who is into wood work would have in their workshop.
Why is it beneficial? It has a stable and robust structure, which makes cuts accurate, and more so, carpenters can use it to make angled and cross cuts.
By the way, the reason the miter saw is the go-to saw is that it is easy to use. Therefore, novices do not have to struggle to find their way through these devices. However, one of the things you will have to learn is to measure cuts and doing it accurately.
Today, we will look into the measuring part because that is where most people go wrong. Here are five things you require to know before when measuring.
1. Always, measure the cut prior
Guesswork in woodwork is not a thing. You have to measure the piece that you require to cut to avoid wasting or repeating the entire process.
Use a tape measure to help you mark the piece before placing it on the table. On that note, it is also proper that you learn how to use a tape measure.
Mark the wood on the center or you can make a straight line from top to bottom. The marks act as a guideline on where you should cut.
2. Do not rely on laser guides fully
Technology advancements also pushed manufacturers to include laser guides on to the miter guides. On the other hand, users should be watchful when dealing with them.
Various findings indicate that most people that rely on the laser guides have a 50-50 chance of getting an undesired cut.
Make the marks yourself; then you could use the laser guide as a confirmation that you are on the right track.
3. Where to make the cuts
Let us imagine a scenario where you want to make a crosscut, which is the easiest to do. First, you have to take a tape measure.
Measure the length and mark the point that you would love to cut. After that, the question that most people ask is, “How do I cut it?”
Well, the solution is easy. Place the blade on the side of the mark, which you intend to throw away. Do not cut at the mark precisely because other cuts would be small.
4. How to cut small pieces equally
One thing we can congratulate the manufacturers of this saw is that it brings the most refined cuts.
Let us say; you are cutting a large piece of wood into small pieces; it is advisable that you avoid making measurements for the cuts prior.
Alternatively, if you do so, ensure that you measure the lengths before making the cuts.
The problem with that process is that there is a considerable probability of getting smaller pieces than you intended; make cuts for the parts that you require.
5. Learn to use a tape measure
Apart from having sufficient knowledge to using the saw, it is always advisable to understand the tape measure calibration.
It helps you get appropriate cuts and measurements, especially when it comes to identifying inches, centimeters, and millimeters.
Note, it can take some time to learn how to make the right measurements. So, do not feel frustrated if you do not get it the first time.
As you use the saw, be sure to observe safety. The blade can be dangerous; it is evident that you require keeping a distance between it and your hands.
If you want to know some of the best saws in the market, head out to Miter Saw Judge.