Upset or Flash Weld Symbols

Flash or upset weld symbols have no arrow side or other side significance in themselves, although supplementary symbols used in conjunction with then may have such significance. The weld symbols for flash or upset welding must be centered on the reference line. Dimensions need not be shown on the welding symbol.

Surface Contour of Flash Weld Symbols or Upset Welds

 The contour symbols (fig. 3-3) for flash or upset welds (fig. 3-80) are indicated in the same manner as that for fillet welds (see this page for more).

Surface Contour of Flash or Upset Welds - Figure 3-80

Welding Jobs in Your Area

Powered by ZipRecruiter
Ask a Welder Now
4 Welders are Online Now.
A Question is Answered Every 12 Seconds!
Ask A Welder >

Page Author:

Welding Jobs in Your Area